Home arrow Wilderness Survival arrow Water Procurement arrow Belowground Still  
 

Financial Survival
Falling Behind on Your Mortgage?
Free digital invitations in minutes at Smilebox.com
Child Life Insurance from GerberLife.com
Find Travel Agents for Any Trip - Get Matched With Travel Experts Who Want Your Business!
FREE stock quote
Menu
Home
Site Map
Wilderness Survival
Terrorism Survival
NBC Survival
Disaster Survival
Urban Survival
Advanced Search
sponsors

Belowground Still PDF Print E-mail
Sunday, 20 August 2006
To make a belowground still, you need a digging tool, a container, a clear plastic sheet, a drinking tube, and a rock
 
Select a site where you believe the soil will contain moisture (such as a dry streambed or a low spot where rainwater has collected). The soil at this site should be easy to dig, and sunlight must hit the site most of the day.

6-24. To construct the still, you should—

  • Dig a bowl-shaped hole about 1 meter (3 feet) across and 60 centimeters (24 inches) deep.

  • Dig a sump in the center of the hole. The sump's depth and perimeter will depend on the size of the container that you have to place in it. The bottom of the sump should allow the container to stand upright.

  • Anchor the tubing to the container's bottom by forming a loose overhand knot in the tubing.

  • Place the container upright in the sump.

  • Extend the unanchored end of the tubing up, over, and beyond the lip of the hole.

  • Place the plastic sheet over the hole, covering its edges with soil to hold it in place.

  • Place a rock in the center of the plastic sheet.

  • Lower the plastic sheet into the hole until it is about 40 centimeters (16 inches) below ground level. It now forms an inverted cone with the rock at its apex. Make sure that the cone's apex is directly over your container. Also make sure the plastic cone does not touch the sides of the hole because the earth will absorb the condensed water.

  • Put more soil on the edges of the plastic to hold it securely in place and to prevent the loss of moisture.

  • Plug the tube when not in use to keep the moisture from evaporating and to keep insects out.

You can drink water without disturbing the still by using the tube as a straw. By opening the still, you release the moist, warm air that has accumulated.

ou may want to use plants in the hole as a moisture source. If so, dig out additional soil from the sides of the hole to form a slope on which to place the plants. Then proceed as above.

If polluted water is your only moisture source, dig a small trough outside the hole about 25 centimeters (10 inches) from the still's lip . Dig the trough about 25 centimeters (10 inches) deep and 8 centimeters (3 inches) wide. Pour the polluted water in the trough. Be sure you do not spill any polluted water around the rim of the hole where the plastic sheet touches the soil. The trough holds the polluted water and the soil filters it as the still draws it. The water then condenses on the plastic and drains into the container. This process works extremely well when your only water source is salt water.

 
You will need at least three stills to meet your individual daily water intake needs. In comparison to the belowground still and the water transpiration bag still, the vegetation bag produces the best yield of water.

Show comments (0) - Add comments to this article:

You are not authorized to leave comments - please login.

recommended